Endress+Hauser Proline Promass 80 - FLUIDTEMP. MIN. # 381

21 Factory settings Device Functions Proline Promass 80
64 Endress+Hauser
21.2 US units (only for USA and Canada)
Low flow cut off, full scale value, pulse value
Language, density, length, temperature, reference density
Unit
Density kg/l
Length mm
Temperature °C
Reference density kg/Nl
Nominal
diameter
Low flow cut off Full scale value Pulse value
[mm] (approx. v = 0.04 m/s) (approx. v = 2 m/s) (approx. 2 pulse/s at 2 m/s)
1 0.003 lb/min 0.15 lb/min 0.002 lb/p
2 0.015 lb/min 0.75 lb/min 0.020 lb/p
4 0.066 lb/min 3.30 lb/min 0.020 lb/p
8 0.300 lb/min 15.00 lb/min 0.200 lb/p
15 1.000 lb/min 50.00 lb/min 0.200 lb/p
15 FB 2.600 lb/min 130.00 lb/min 2.000 lb/p
25 2.600 lb/min 130.00 lb/min 2.000 lb/p
25 FB 6.600 lb/min 330.00 lb/min 2.000 lb/p
40 6.600 lb/min 330.00 lb/min 2.000 lb/p
40 FB 11.000 lb/min 550.00 lb/min 20.000 lb/p
50 11.000 lb/min 550.00 lb/min 20.000 lb/p
50 FB 26.000 lb/min 1300.00 lb/min 20.000 lb/p
80 26.000 lb/min 1300.00 lb/min 20.000 lb/p
100 44.000 lb/min 2200.00 lb/min 20.000 lb/p
150 95.000 lb/min 4800.00 lb/min 200.000 lb/p
250 260.00 lb/min 13000.00 lb/min 200.000 lb/p
DN 15, 25, 40, 50 “FB” = Full bore versions Promass I
Unit
Language English
Density g/cc
Length INCH
Temperature °F
Reference density g/Scc