Endress+Hauser RIA14 - 6 Operation options; 6.1 Overview of operation options; 6.1.1 Display; 6.2 Access to the operating menu via operating keys

RIA14 Operation options
Endress+Hauser 13
Electrical connection Note
Is the cable gland sealed tight? Visual inspection
Is the housing cover firmly tightened? Visual inspection
6 Operation options
6.1 Overview of operation options
6.1.1 Display
2
1a
1b
1
3
4
5
6
A0011157
 7 LC display of the field indicator (backlit, fitted in steps of 90 °)
1 Bar graph display
1a Mark for underranging
1b Mark for overranging
2 Measured value display, digit height 20.5 mm (0.8 in)
3 14-segment display for units and messages
4 "Programming locked'' symbol
5 Unit "%"
6 "Fault" warning icon
6.2 Access to the operating menu via operating keys
NOTICE
Loss of explosion protection when housing is open
‣
Parameter configuration must take place outside of the hazardous area.
A0011261
 8 Operating keys of the field indicator ("-", "+", "E")
The display must remain connected to the electronics unit during configuration.