Endress+Hauser RIA14 - 12.8.2 Local operation; 12.8.3 Remote operation

RIA14 Technical data
Endress+Hauser 31
12.8.2 Local operation
2
1a
1b
1
3
4
5
6
A0011157
 14 LC display of the field indicator (backlit, fitted in steps of 90 °)
1 Bar graph display
1a Mark for underranging
1b Mark for overranging
2 Measured value display, digit height 20.5 mm (0.8 in)
3 14-segment display for units and messages
4 "Programming locked'' symbol
5 Unit "%"
6 "Fault" warning icon
• Display area
–19 999 to +99 999
• Offset
–19 999 to +99 999
• Signalization
Overranging/underranging
• Limit value over/under cut
Limit value overranging/underranging
12.8.3 Remote operation
Configuration
The device can be configured with the FieldCare PC software. FieldCare Device Setup is
included in the scope of delivery of the Commubox FXA291 and TXU10-AC (see
'Accessories') or can be downloaded free of charge via www.endress.com.
Interface
Configuration interface at device; connection to PC via interface cable (see 'Accessories').
Configurable device parameters (selection)
Measuring dimension, measuring ranges (linear/quadratic), setup lock via operator code,
failsafe mode, digital filter (damping), offset, limit value (min/max/alarm), alarm limit
values can be configured by the user