Connections
Clicking the
Connections
link under the
Device Status
menu displays the list of clients associated to the Access Point’s
2.4GHz/5GHz, along with the MAC address, TX, RX and signal strength for each client. Clicking
Kick
in the Block column removes
this client.
Click
Refresh
to refresh the Connection List page.
Note
: Only applicable in Access Point and WDS AP modes.
Realtime
Realtime
The Realtime section contains the following options:
CPU Loading
: 3 minutes CPU loading percentage information, it displays current loading, average loading and peak loading
status. Left bar is loading percentage; button is time tracing. Interval is every 3 seconds
To Next Page
Loading...
