Wireless Security
The Wireless Security section lets you configure the Access Point’s security modes: WEP, WPA-PSK, WPA2-PSK, WPA-PSK Mixed,
WPA-Enterprise, WPA2-Enterprise and WPA Mixed Enterprise.
It is strongly recommended that you use
WPA2-PSK
. Click on the
Edit
button under Wireless Settings next to the SSID to change
the security settings.
WEP
Auth Type:
Select Open System or Shared Key.
Input Type:
ASCII: Regular Text (Recommended) or HEX: Hexadecimal Numbers (For advanced users).
Key Length:
Select the desired option and ensure the wireless clients use the same setting. Your choices are: 64, 128, and 152-bit
password lengths.
Default Key:
Select the key you wish to be default. Transmitted data is ALWAYS encrypted using the Default Key; the other Keys
are for decryption only. You must enter a Key Value for the Default Key.
Encryption Key:
Enter the Key Value or values you wish to use. The default is none.
To Next Page
Loading...
