Basic
This page allows you to modify the device’s IP settings and the Spanning Tree settings. Enabling Spanning Tree protocol will
prevent network loops in your LAN network.
IPv4 Settings
IP Network Setting
: Select whether the device IP address will use the static IP address specified in the IP Address field or be
obtained automatically when the device connects to a DHCP server.
IP Address
: The IP Address of this device.
IP Subnet Mask
: The IP Subnet mask of this device.
Gateway
: The Default Gateway of this device. Leave it blank if you are unsure of this setting.
Primary/Secondary DNS
: The primary/secondary DNS address for this device.
To Next Page
Loading...
