Enable Fast Roaming
: Enable or disable fast roaming feature.
Enable Advanced Search
: Enable or disable advanced search feature.
WDS Link Settings
Using the WDS (Wireless Distribution System) feature will allow a network administrator or installer to connect to Access Points
wirelessly. Doing so will extend the wired infrastructure to locations where cabling is not possible or inefficient to implement.
Note
: Compatibility between different brands and models of Access Points is not guaranteed. It is recommended that the WDS
network be created using the same models for maximum compatibility.
Also note
: All Access Points in the WDS network need to use the same Channel and Security settings.
To create a WDS network, please enter the MAC addresses of the Access Points that you want included in the WDS. There can be
a maximum of four Access Points.
Note
: Only applicable in WDS AP and WDS Bridge modes.
To Next Page
Loading...
