User Questions
MOST
COMMONLY
ASKED
USER
QUESTIONS
The following questions are the most commonly asked
by
end
users. Our Customer Service
Representatives (CSRs) resolve these situations
over
the telephone daily.
Question:
CSR:
Question:
CSR:
Question:
CSR:
Question:
CSR:
pageJ6
How do I Mix a Track
or
a Song?
Sequences (Tracks)
1)
Set RECORD
MODE
to ADD (see Section 8 o/the Musician's Manual)
2) Select the Instrument-Track
3) Press Edit then Track, scroll left
to
MIX
4) Set mix to the desired value
5)
Hold
Record
and
press Play
6)
Let the Sequencer play one bar
7) Press
Stop
8) Answer YES
to
KEEP=OLD -
NEW
In
Song Mode
1) Chain sequences into a Song
2)
Set RECORD
MODE
to
ADD
3) Select the Instrument-Track
4) Press
Edit then Track, scroll left
to
MIX
5)
Hold
Record
and
press Play
6)
Mix Track through entire Song using the
Data
Entry Slider
or
the
CV
Pedal
with PED=VOL
7) Answer YES
to
KEEP=OLD -
NEW
The
EPS-16
PLUS will
not
record a sequence from external sequencer
in
MUL
11
mode.
You must have
O.S. version 1.1
or
higher.
Why won't the
EPS-16
PLUS
let
me
edit
converted Mirage sounds?
WS=1 contains the actual wavesample information for the
Lower
sound, WS=17
for the Upper.
All
other wave samples
(30
of
them) are copies
of
WS=1
or
WS=17. Therefore. isolate the desired wavesample(s) as follows:
1)
Create
a new Instrument (see Section 3
o/the
MusiCian's
Manu.al)
2) Create a
new
Layer
in
that Instrument (see Section 7
o/the
Musician's
Manuol)
3) Copy desired wavesample into the
new
Layer
(see
Section
6o/the
Musician's Manual) .
4) Truncate the new wavesample (see Section 6
o/the
Musician's Manual)
5)
Edit as you wish
Why
do
some other manufacturer's instruments crash when played from an
EPS-16
PLUS keyboard?
These instruments cannot handle the vast amount
of
MIDI
data
that Poly-Key
generates. Turn the
key
pressure settings
to
CHAN or OFF
on
MIDI and each
INSTRUMENT, as follows:
1) Press
Edit, then
System-MIDI
(see Section 2
o/the
Musician's Manual)
2)
Scroll to BASECHANNEL PRESSURE=KEY
3)
Change
it to
CHANNEL
or
OFF
4)
Press
Edit, then
Instrument
(see Section 3
o/the
Musician's Manual)
5)
Scroll to PRESSURE MODE=KEY
6)
Change
it to
CHANNEL
or
OFF
EPS-J6 PLUS Service Manual