Software Notes
The following
change
was
included in ROM Version l.00F:
(Keyboard SIN
13871,
Rack
SIN
10738)
A bug was fixed
that
caused
a
DISK
TYPE
ERROR
when
saving instruments to FLASHBANK.
The following changes were included in O.S. DISK VERSION 1.10:
In version 1.10,
the
MULTI-TRACK
RECORD
feature, which was omitted from version 1.00.
has
been implemented.
In
addition. there
are
two
additional refmements added
as
ofv
1.10
to
make the software a little more user-friendly:
• When you go
into
Record after loading or deleting instruments (a condition that requires the EPS-16 PLUS to
shuffle memory
for
a second or
two)
the display will show SHUFFLING DATA, until the click starts and it is ready
to record. Previously there
was
no
visual
feedback during
this
time, causing
users
to
wonder what was going
on;
• When the sequencer
is
synced to MIDI
(CLOCK.
SOURCE=MIDI on the EDIT/Seq·Song page) and you press record,
the display shows
WAITING
...
to
indicate that the unit is waiting for a MIDI Start and clocks before going into
Record.
If
the sequencer
is
synced
to
MIDI
and it needs to shuffle memory before going into record, it will show
SHUFFLING
DATA
for
as
long
as necessary, then
go
to WAITING... Always wait until the display shows waiting
before
starti:ng
the
sending
device.
The following is a
summary
of changes which were included in version 1.10:
HANGING
NOTES
• It was possible
to
make notes
hang
while playing
DIST
GUITAR sound (related
to
layer delay).
PITCH
WHEEL
• Pitch wheel reading
drifted
as
the
unit warmed up.
MIDI
•
If
TRANSMIT ON=INST
CHAN,
it didn't send proper values for key pressure out
MIDI.
• Sustain pedals
from
MIDI
were
not recorded properly
by
the sequencer.
LOADING
AND SAVING
• When you loaded an Instrument into a copy
of
an already loaded instrument, it sometimes crashed, displaying
ERROR 129.
• The EPS-16 PLUS did not handle errors properly
when
saving multi-disk fIles, particularly when resaving an
existing one. Sometimes it created two
Disk
1 's and a Disk 2 for a 3-disk sound.
• When a bank should have been loading
sounds
from
hard
disk, the unit seemed to
ask
for a floppy. then displayed
WRONG DISK INSERTED
when
you
inserted the floppy, because it was really looking
at
the hard
disk
but with
the wrong disk
label.
• When an
EPS
(classic) bank
was
loaded. the track
PAN
values were ttanslated incorrectly
in
the presets.
SEQUENCER
• It was possible
to
edit track
parameters
when no Instrument
was
loaded.
• Click pan defaulted
to
+3; it should default
to
0 (center).
• On CHORUS + REVERB algorithm, click assigned to BUS3 still came out left channel when BUS3=OFF.
•
Click
assigned
to
BUS3 periodically snuck into BUS1, creating a reverb splash, especially with
44KHZ
effects.
• Overdub
Standby
state
was
not
cleared
when
an
1Dllooped
sequence stopped.
EFFECTS
• Effects could howl when loading a
bank
with a playback
rate
different from the existing one.
• On 44KHZ REVERB algorithm,
Denme
Rate and
Amt
parameters were interconnected, changing either one changed
the
other.
.
SAMPLING
• Entering and exiting sampling while holding keys and sustain
pedal
could confuse the unit, causing sustain pedal to
hang. or
be
ignored.
or
worse.
page
26
EPS-J6 PLUS Service
Ma1UJ1l1
To Next Page
Loading...
Need help?
General
