Section 7: Using the Epilog Dashboard
99
HINT! Many users find it helpful to save the configurations with a name that
associates the configurations with one of two things:
1. The customer. For example, Jones Pharmacy 04 Awards Banquet.dat
2. The material size and type. For example, 9 x 12 Wood.dat
The Dashboard uses
standard Windows
protocol to save the
configuration files.
When you installed
the Epilog Dashboard
there was a dedicated
configurations folder
created where you
will need to save the
configurations.
The path for the
Configurations folder is
shown here:
My Documents
/Epilog/engraving_setting.
Give your file a name and
then click on Save. You now
have a custom Configuration
file that can be used the next
time you need to run this job
or material.
To Next Page
Loading...