Section 1: Safety
10
8. Fire Safety Label.
This fire hazard label is located on the right side cover of your laser system.
Do not cover this label at any time.
REFER TO THE USERS
MANUAL FOR ADDITIONAL
INFORMATION REGARDING
FIRE SAFETY
DO NOT OPERATE
MACHINE UNATTENDED
DANGER
FIRE HAZARD
USE EXTREME CAUTION WHEN
CUTTING FLAMMABLE MATERIALS
SUCH AS WOOD OR ACRYLIC.
A PROPERLY MAINTAINED FIRE
EXTINGUISHER SHOULD BE KEPT
NEAR THE MACHINE AT ALL TIMES.
EPILOG RECOMMENDS A CO FIRE
EXTINGUISHER.
2
PERIODICALLY REMOVE THE
VECTOR CUTTING GRID AND
REMOVE DEBRIS FROM THE TABLE
PAN.
PERIODICALLY REMOVE THE
EXHAUST TUBE ADAPTER FROM
THE BACK OF THE MACHINE AND
REMOVE ANY DEBRIS FROM THE
EXHAUST PORT.
To Next Page
Loading...
Need help?
General