EasyManua.ls Logo

Epilog Laser Zing 10000 - Page 261

Epilog Laser Zing 10000
279 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Appendix C Additional Dashboard Instructions
247
Windows Vista has incorporated the new Internet Protocol called IPv6 in addition
to the traditional IPv4 which is what most PCs will use. IPv6 will eventually
replace IPv4 but both will be available for years to come. For our purpose, IPv4 is
the standard.
Select Use the following IP
address:
Type in the following (leave
everything else blank on this
screen)
IP Address: 192.168.3.3
Subnet mask: 255.255.255.0
Default gateway: Leave blank
This number is not an error;
the last digit of the IP address
in this window only, must be
different than the IP address
set in theEpilog EXT.
Click the OK button in this window and then click on the Close button in the next
window.
That’s it! The IP Address in your computer is set. Your computer will be able to
talk to your laser after you install the print driver (which is the next step).

Table of Contents