Epilog Laser Zing 10000 User Manual

Section 3: Getting Started
17
Epilog Exhaust Blower Connections
Use flexible aluminum or galvanized sheet metal ducting to connect the laser
systems exhaust port to the intake side of your exhaust fan. Then connect the
exhaust side of the exhaust fan to the metal duct leading outside.
Check your exhaust system for leaks. Most small leaks can be remedied with
duct tape.
DO NOT OPERATE your laser with inadequate or leaking exhaust.
Exhaust Port

Epilog Laser Zing 10000 Specifications

General

Brand	Epilog Laser
Model	Zing 10000
Category	Measuring Instruments
Language	English