ePropulsion eLite User Manual

30
Method 2: Remove the kill switch from the kill switch hole. This will happen automatically if the
driver has the kill switch lanyard attached to their wrist and falls in, for example. Always wear
the kill cord!
Figure 5.7
Method 3: Press and hold the power button for 2 seconds to turn off the outboard motor.
Figure 5.8
If the throttle is in the neutral position for 30 minutes without any operation, the outboard
motor will automatically shut down.
5.4 Tilt Up and Release
The ePropulsion eLite Electric Outboard Motor has a trim and tilt function. If the outboard
motor is going to be stopped for a period of time or the boat is going to be moored in shallow
water, the outboard motor should be tilted up. This will help prevent damage to the propeller
and motor housing due to collision with underwater obstacles, and also to reduce corrosion.
1 2 3
4
A
B
3 2 1
B
A
C
D
C
g
单位:mm
Guangdong ePropulsion Technology Limited
广东逸动科技有限公司
4
开机进度条
油门档位
过温警告
低电量报警
功率/电量/故障代码
安全开关状态
充电状态
普通故障报警
W：功率单位
严重故障报警
%：剩余电量百分比
电量条
运动模式状态
Start Indicator
Gear
Overtemperature alarm
Low Battery alarm
Power/Battery Capacity/Error Code
Kill Switch
Charging
Minor Fault alarm
Power unit
Serious Fault alarm
Remaining Battery
Battery Capacity indicator
Sport Mode
Start Indicator
Gear
Overtemperature alarm
Low Battery alarm
Power/Battery Capacity/
Error Code
Kill Switch
Charging
Minor Fault alarm
Power unit
Serious Fault alarm
Remaining Battery
Battery Capacity indicator
Sport Mode
温度报警，限制功率
低电量报警，限制功率
故障代码
普通故障报警，限制功率
严重故障报警，系统停机
Temperature alarm, limited power
Low Battery alarm, limited power
Error Code
Minor Fault alarm, limited power
Serious Fault alarm,
system shutdown
6.1显示屏概览
6.1显示屏概览(英文)
6.3安全开关
6.5故障说明
6.5故障说明(英文)
5.2.2
7.1AC-DC充电
7.2充电显示
6.4电量提醒
5%
10%
20%
50%
100%
6.2
查看剩余电量
开机
关机进入运动模式
进入安全开关
丢失模式
切换显示功率/电量

ePropulsion eLite Specifications

General

Brand	ePropulsion
Model	eLite
Category	Outboard Motor
Language	English