ePropulsion eLite - Power Button Functions

36
The ePropulsion eLite Electric Outboard Motor kill switch has interactive features with the
outboard.
When operating the outboard motor, if the kill switch is detached from the kill switch hole, the
outboard motor will immediately stop working and make a beeping noise. The kill switch icon
and the neutral gear icon on the screen will flash.
Figure 6.2
• If you still have the kill switch, replace it. Remember that the outboard motor can only be
started again if the throttle is in the neutral position.
• If the original kill switch is lost, hopefully you have a spare kill switch on board and can use
that. If you do not have a spare kill switch, the outboard motor cannot be started normally,
but there is a kill switch lost mode. With the power on, this is entered by long-pressing
the power button for 6 seconds. There will be a power-off sound when long pressing for 2
seconds, and a power-on sound when long pressing for 4 seconds. After entering the kill
switch lost mode, the kill switch icon will continue to be displayed. Kill switch lost mode will
be exited automatically if a kill switch is put in place.
Figure 6.3
开机进度条
油门档位
过温警告
低电量报警
功率/电量/故障代码
安全开关状态
充电状态
普通故障报警
W：功率单位
严重故障报警
%：剩余电量百分比
电量条
运动模式状态
Start Indicator
Gear
Overtemperature alarm
Low Battery alarm
Power/Battery Capacity/Error Code
Kill Switch
Charging
Minor Fault alarm
Power unit
Serious Fault alarm
Remaining Battery
Battery Capacity indicator
Sport Mode
Start Indicator
Gear
Overtemperature alarm
Low Battery alarm
Power/Battery Capacity/
Error Code
Kill Switch
Charging
Minor Fault alarm
Power unit
Serious Fault alarm
Remaining Battery
Battery Capacity indicator
Sport Mode
温度报警，限制功率
低电量报警，限制功率
故障代码
普通故障报警，限制功率
严重故障报警，系统停机
Temperature alarm, limited power
Low Battery alarm, limited power
Error Code
Minor Fault alarm, limited power
Serious Fault alarm,
system shutdown
6.1显示屏概览
6.1显示屏概览(英文)
6.3安全开关
6.5故障说明
6.5故障说明(英文)
5.2.2
7.1AC-DC充电
7.2充电显示
6.4电量提醒
5%
10%
20%
50%
100%
6.2
查看剩余电量
开机
关机进入运动模式
进入安全开关
丢失模式
切换显示功率/电量
开机进度条
油门档位
过温警告
低电量报警
功率/电量/故障代码
安全开关状态
充电状态
普通故障报警
W：功率单位
严重故障报警
%：剩余电量百分比
电量条
运动模式状态
Start Indicator
Gear
Overtemperature alarm
Low Battery alarm
Power/Battery Capacity/Error Code
Kill Switch
Charging
Minor Fault alarm
Power unit
Serious Fault alarm
Remaining Battery
Battery Capacity indicator
Sport Mode
Start Indicator
Gear
Overtemperature alarm
Low Battery alarm
Power/Battery Capacity/
Error Code
Kill Switch
Charging
Minor Fault alarm
Power unit
Serious Fault alarm
Remaining Battery
Battery Capacity indicator
Sport Mode
温度报警，限制功率
低电量报警，限制功率
故障代码
普通故障报警，限制功率
严重故障报警，系统停机
Temperature alarm, limited power
Low Battery alarm, limited power
Error Code
Minor Fault alarm, limited power
Serious Fault alarm,
system shutdown
6.1显示屏概览
6.1显示屏概览(英文)
6.3安全开关
6.5故障说明
6.5故障说明(英文)
5.2.2
7.1AC-DC充电
7.2充电显示
6.4电量提醒
5%
10%
20%
50%
100%
6.2
查看剩余电量
开机
关机进入运动模式
进入安全开关
丢失模式
切换显示功率/电量