26
Icons Functions
GPS status
indicator
Hidden: no satellite signal is received or
GPS does not work.
Blink: GPS is connecting to satellites.
Shown constantly: GPS is in use.
Fan fault
Blink:The motor fan has faults. Please con-
tact the dealer to check the fan wiring.
Over-heat alert
Hidden: system temperature is in normal
range.
Blink: system temperature is a little high
and the maximum input power of motor
has been lowered
Shown constantly: system is over tempe-
rature and the outboard will stop working.
The outboard can’t be started until the sys-
tem temperature drops to a certain level.
Kill switch sta-
tus indicator
Hidden: kill switch is present and is wor-
king well.
Shown constantly: the kill switch is deta-
ched.
Current speed
Displaying real time cruising speed. Set units
(KM/H,MPH or KNOTS) in preference setting
page.
Distance/time
display
Displaying real time travel distance/time. Set
units (MILE, KM (kilometer) and NM (nautical
mile)) in preference setting page.
The time unit is HR (hour).
Travelled dis-
tance/time
or remaining
distance/time
: Remaining distance or time that the out-
board can travel.
Set units (MILE, KM (kilometer) and NM (nauti-
cal mile)) in preference setting page.
: Travelled distance or time.
To Next Page
Loading...
