Chapter 3 Removal and Replacement Procedures Revision B
Epson AcuLaser C2900N 3 - 54 Confidential
18) Remove the SPRING FEED OUT
(PL3.1.15) from the printer.
19) Release the hook of the GEAR ASSY
FEED (PL3.1.19), remove the GEAR
ASSY FEED from the SHAFT ASSY FEED
(PL3.2.2).
Note: When carrying out the work this
procedure, pushing down the LEVER
FEED (PL3.1.13).
20) Release the harness of the
SOLENOID FEED MSI (PL3.1.11) from the
hooks of the printer.
Note: When carrying out the work described next procedure, leave the relay connector on the
printer harness side.
To Next Page
Loading...
