Epson AcuLaser C2900N - Transfer;Fusing;Exit

6 - 22
Chapter 6 Principles of Operation
Epson AcuLaser C2900N
Revision B
Confidential
2.6 Transfer/Fusing/Exit
The sheet that has passed through the REGI ROLL goes into the TRANSFER ASSY (PL6.1.7) that
rotates by the torque from the DRIVE ASSY MAIN (PL7.1.2), where the toner image is transferred from
the belt to the sheet. Then, the sheet is fed to the exit section while its toner image is being fused in the
FUSER UNIT (PL6.1.1) by the Heat Roll that rotates by the torque from the DRIVE ASSY SUB
(PL7.1.1).
The print-completed sheet (1 side-printed or 2 side-printed) is ejected from the printer by the ROLL
ASSY EXIT that rotates in the exit direction by the torque from the DRIVE ASSY SUB.
Transfer ASSY
Drum (K)
ROLL ASSY EXIT
Pressure Belt
Drum (C)
Drum (M)
Drum (Y)
Heat Roll
MiS06027SA