Epson AcuLaser C2900N - Feeding in Duplex Section

6 - 23
Chapter 6 Principles of Operation
Epson AcuLaser C2900N
Revision B
Confidential
2.7 Feeding in Duplex Section
After the 1 side-printed sheet is ejected from the FUSER UNIT, the ROLL ASSY EXIT guides the sheet
to the duplex section by rotating in the reverse direction by the torque from the ROLL ASSY EXIT under
control of CLUTCH ASSY EXIT.
From the duplex section, the 1 side-printed sheet is fed to the registration section by the ROLLER
ASSY DUP (PL11.2.9) that rotates by the torque from the DRIVE ASSY DUP (PL11.2.5).
After the printing on the side 2 is completed, the sheet exits in the same manner as it does after the
printing on the side 1 is completed.
MiS06028SA
ROLL ASSY EXIT
CLUTCH ASSY EXIT
ROLL ASSY EXIT
ROLLER ASSY DUP
CLUTCH ASSY EXIT
DRIVE ASSY EXIT
DRIVE ASSY DUP