Epson AcuLaser C2900N - Interconnection Wiring Diagram of Parts; Notes on Using the Wiring Diagram between Parts

7 - 3
Chapter 7 Wiring Diagrams and Signal Information
Epson AcuLaser C2900N
Revision B
Confidential
2. Interconnection Wiring Diagram of Parts
2.1 Notes on Using the Wiring Diagram between Parts
The following describes the legend of the wiring diagrams between parts shown on the following pages.
Symbols Description
Denotes a plug.
Denotes a jack.
Denotes Pin yy and Jack yy of the connector Pxx and Jxx.
Denotes the parts.
PL X.Y.Z implies the item "Z" of plate (PL) "X.Y" in Chapter 5.
Parts List.
Denotes functional parts attached with functional parts name.
Denotes the control and its outline in PWB.
Denotes a connection between parts with harnesses or wires,
attached with signal name/contents.
Denotes the function, and logic value of the signal to operate the
function (Low: L, High: H).
The given voltage is for signal in high status.
The arrow indicates the direction of signal.
Denotes the function, and logic value of the signal when the func-
tion operated (Low: L, High: H).
The given voltage is for signal in high status.
The arrow indicates the direction of signal.
P/JXX
YY
PWBA
HNB DRV
Heater
Control
DEVE_A
REGI CLUTCH
EXIT PAPER