Chapter 3 Removal and Replacement Procedures Revision B
Epson AcuLaser C2900N 3 - 68 Confidential
19) Release the ACTUATOR REGI OUT
from the hook on the CHUTE UP
(PL3.2.26), open the ACTUATOR REGI
OUT.
20) Remove the E-ring that fixes the GEAR
REGI R (PL3.2.22) to the ROLL ASSY
REGI (PL3.2.9), using a miniature
screwdriver.
21) Remove the GEAR REGI R from the
ROLL ASSY REGI.
Note: When carrying out the work this
procedure, it is easier to push the ROLL
REGI METAL (PL3.2.10) to frontward.
To Next Page
Loading...
