Chapter 3 Removal and Replacement Procedures Revision B
Epson AcuLaser C2900N 3 - 72 Confidential
4) Attach the BEARING EARTH REGI to
the ROLL ASSY REGI.
Note: When carrying out the work this
procedure, it is easier to push the ROLL
REGI METAL (PL3.2.10) to frontward.
5) Attach the GEAR REGI R to the ROLL
ASSY REGI.
Note: When carrying out the work this
procedure, it is easier to push the ROLL
REGI METAL (PL3.2.10) to frontward.
6) Secure the GEAR REGI R to the ROLL
ASSY REGI with the E-ring by using the
pliers.
To Next Page
Loading...
