Epson AcuLaser C2900N - Page 330

Chapter 3 Removal and Replacement Procedures Revision B
Epson AcuLaser C2900N 3 - 76 Confidential
[Replacement]
1) Attach the SPRING ACT REGI to the
ACTUATOR REGI IN.
Note: When carrying out the work
described next procedure, ensure that
the SPRING ACT REGI is hung to
ACTUATOR REGI IN and the CHUTE UP
correctly.
SPRING ACT REGI
2) Insert the right shaft of the ACTUATOR
REGI IN into the hole of the CHUTE UP,
hang the SPRING ACT REGI to the
CUHTE UP.