❏ To register an FTP or SMB destination, refer to “Adding a Speed Dial Number (Scan To Server)”
on page 28.
5. Click the OK button.
Programming of the speed dial number is completed.
Adding a Speed Dial Number (Fax/E-mail)
The following procedures describe how to send scan data with a fax number or e-mail address. The
transmission settings and destination can first be registered as a speed dial number.
For registering a fax number
1. Click the New Registration button.
2. Select “Fax”.
3. Specify the settings for the speed dialing.
❏ A maximum of 20 characters can be entered for a name.
❏ A maximum of 50 numbers can be entered for a fax number.
4. Click the Details button, and then specify the transmission speed and batch transmission time.
5. When registering speed dial numbers to a group, select from “Add to Group” list.
These speed dial numbers cannot be added to groups registered with an e-mail address.
Note:
To edit a group dial, refer to “Programming/Editing a Group Dial” on page 31.
6. Click the OK button.
The added speed dial number appears in the “Dial Registration” list.
AcuLaser CX16NF Reference Guide
Using Local Setup Program 27
To Next Page
Loading...
