Epson AcuLaser CX16 Reference Guide

DNS CONFIG.
Purpose
Sets whether or not the DNS server setting is to be specified.
If specifying the DNS server setting, the SMTP server can be specified as a host name when using
network scanning.
If ENABLE is selected, type in the IP address of the DNS server.
If DISABLE is selected, the DNS server cannot be referenced.
Options
DISABLE/ENABLE
Default
DISABLE
Range
(If DNS CONFIG. is set to ENABLE)
0 to 255 for each xxx triplet
Use the keypad to input each number; use the l and r keys to move between triplets.
Notes
A single digit number, such as “1”, cannot be input as “001”. Align the number on the left and
input “1” as “1 _ _”. Use the l and r keys to move between triplets.
The Back key can also be used for deleting. To cancel DNS CONFIG. menu, hold down the Back
key for more than one second, and then press the Back key again after all settings have been
cleared.
After changing the settings, the machine must be turned off, then on again.
Note:
When using network scanning and when specifying the SMTP server as a host name instead of as an IP
address, be sure to select ENABLE, and then specify the IP address of the DNS server.
DHCP
Purpose
If there is a DHCP server on the network, specifies whether the IP address and other network
information is automatically assigned by the DHCP server.
Options
DISABLE/ENABLE
Default
ENABLE
BOOTP
Purpose
If there is a BOOTP server on the network, specifies whether the IP address and other network
information is automatically assigned by the BOOTP server.
Options
DISABLE/ENABLE
Default
DISABLE
AcuLaser CX16NF Reference Guide
Understanding the Network Setting Menu 39

Epson AcuLaser CX16 Specifications

General

Brand	Epson
Model	AcuLaser CX16
Category	All in One Printer
Language	English