Chapter 2
Understanding the Network Setting Menu
NETWORK SETTING Menu
Location within the Configuration Menu
Note:
The ADMIN. MANAGEMENT menu is accessible only by the administrator. To display the settings for this
menu, press d to display UTILITY, and press select key to display MACHINE SETTING , and then select
ADMIN. MANAGEMENT, use the keypad to type in the 6-digits administrator access code (default :
000000), and then press the Select key.
Accessing the Network Setting Menu
Use the following series of keystrokes at the machine to access the Network Setting menu options on
your machine. This menu provides access to all of the configurable network items.
Press this key . . .
(until) the message window reads . . .
d
UTILITY
MACHINE SETTING
d
ADMIN. MANAGEMENT
Use the keypad to input 6-digits administrator number.
ADMINISTRATOR NO.
d
NETWORK SETTING
Using the Network Setting Menu Options
If the machine is connected to a network, the following settings should be specified. For details about
each setting, contact your network administrator.
AcuLaser CX16NF Reference Guide
Understanding the Network Setting Menu 37
To Next Page
Loading...
Need help?
General
