Programming/Editing a Group Dial
The following procedure describes how to edit or delete a group dialing program.
Note:
Program group dialing after programming speed dial numbers.
Add or delete destinations from group dialing by changing the settings for the registered speed dial
destinations. For details, refer to “Editing a Speed Dial Number” on page 30.
1. Click
beside “Dial Registration”, and then click beside the “Group Dial”.
2. From the tree that is displayed, click the group name to be edited.
Note:
❏ Click
beside the group name, and then displays the speed dial number that registered in the
group.
❏ A maximum of 20 group dial can be programmed.
❏ A maximum of 50 speed dial numbers can be programmed.
3. Click Edit button.
Note:
If a speed dial number in a group is selected, the registered information for the speed dial number can
be changed. For details, refer to “Editing a Speed Dial Number” on page 30.
AcuLaser CX16NF Reference Guide
Using Local Setup Program 31
To Next Page
Loading...
Need help?
General
