For registering an E-mail address
1. Click the New Registration button.
2. Select “E-mail”.
3. Specify the settings for the speed dialing.
❏ A maximum of 20 characters can be entered for the name.
❏ A maximum of 64 characters can be entered for the E-mail address.
4. When registering speed dial numbers to a group, select from “Add to Group” list.
These speed dial numbers cannot be added to groups registered with a fax number.
Note:
To edit a group dial, refer to “Programming/Editing a Group Dial” on page 31.
5. Click the OK button.
The added speed dial number appears in the “Dial Registration” list.
Adding a Speed Dial Number (Scan To Server)
The following procedures describe how to send scan data via a server. The transmission settings and
destination can first be registered as a speed dial number.
For FTP transmissions
1. Click the New Registration button.
AcuLaser CX16NF Reference Guide
Using Local Setup Program 28
To Next Page
Loading...
