Epson AcuLaser CX16 - Page 41

IPP
Purpose
Select whether or not to enable IPP.
Options
DISABLE/ENABLE
Default
ENABLE
SLP
Purpose
Select whether or not to enable SLP.
Options
DISABLE/ENABLE
Default
ENABLE
SNMP
Purpose
Select whether or not to enable SNMP.
Options
DISABLE/ENABLE
Default
ENABLE
SPEED/DUPLEX
Purpose
Specifies the transmission speed for the network and the transmission method for bi-directional
transmission.
Options
AUTO
10BASE-T FULL
10BASE-T HALF
100BASE-TX FULL
100BASE-TX HALF
Default
AUTO
AcuLaser CX16NF Reference Guide
Understanding the Network Setting Menu 41