Check Remedy
Is color adjustment set to an appropriate value? Adjust the Color Adjustment setting from the Configuration menu.
s Image - Color Adjustment p.98
Are the color saturation and tint adjusted correctly?
(Only when projecting images from a video source)
Adjust the Color Saturation and Tint settings from the Configuration menu.
s Image - Color Saturation, Tint p.98
Images appear dark
Check Remedy
Is the image brightness set correctly? Make Brightness and Power Consumption settings from the Configuration menu.
s Image - Brightness p.98
s Extended - Power Consumption p.101
Is the
contrast
g
adjusted correctly? Adjust the Contrast setting from the Configuration menu.
s Image - Contrast p.98
Is it time to replace the lamp? When the lamp is nearly ready for replacement, the images become darker and the color quality declines. Replace the
lamp with a new one.
s "Replacing the Lamp" p.139
Problems when Projection Starts
The projector does not turn on
Check Remedy
Did you press the [t] button? Press the [t] button to turn the power on.
Are all of the indicators off? The power cord is not connected correctly or power is not being supplied.
Disconnect and then reconnect the power cord.
s
"From Installation to Projection" p.39
Check the breaker and so on to ensure power is being supplied.
Problem Solving
128
To Next Page
Loading...
Need help?
General
