Using the Remote Control to Operate the Mouse
Pointer (Wireless Mouse)
You can control the computer's mouse pointer from the projector's remote
control. This function is called Wireless Mouse.
The following operating systems are compatible with Wireless Mouse.
Windows Mac OS X
OS
Windows 98
Windows 98SE
Windows Me
Windows 2000
Windows XP
Windows Vista
Windows 7
Mac OS X 10.3.x
Mac OS X 10.4.x
Mac OS X 10.5.x
Mac OS X 10.6.x
Mac OS X 10.7.x
* It may not be possible to use the Wireless Mouse function under some
versions of the operating systems.
Use the following procedure to enable the Wireless Mouse function.
a
Set USB Type B to Wireless Mouse/USB Display from the
configuration menu. (EB-485Wi/EB-480i/EB-475Wi only)
s Extended - USB Type B p.103
b
Connect the projector to the computer with the supplied or a
commercially available USB cable.
s "Connecting a Computer" p.26
c
Change the source to one of the following.
• USB Display
• Computer1
• Computer2
• HDMI
s "Switching to the Target Image Using the Remote Control"
p.41
Once set, the mouse pointer can be controlled as follows.
Moving the mouse pointer
[ ][ ][ ][ ] buttons:
Moves the mouse pointer.
Mouse clicks
[Esc] button: Right click.
[
] button: Left click. Press quickly
twice to double-click.
Drag and drop
While holding down the [ ] button,
press the [
], [ ], [ ], or [ ]
button to drag.
Release the [
] button to drop at the
desired location.
Page Up/Down
[[] button: Moves to the previous page.
[]] button: Moves to the next page.
Projection Functions
70
To Next Page
Loading...
Need help?
General
