Items in the Configuration menu that cannot be set by a Web browser
• Settings menu - Keystone - Quick Corner
• Settings menu - Image Shift
• Settings menu - Pointer Shape
• Settings menu - Pattern (except Pattern Type)
• Settings menu - User Button
• Extended menu - User's Logo
• Extended menu - USB Type B
• Extended menu - Easy Interactive Function
• Extended menu - Language
• Extended menu - Operation - High Altitude Mode
• Reset menu - Reset All and Reset Lamp Hours
The settings for items on each menu are the same as the projector's
Configuration menu.
s "Configuration Menu" p.94
Items that can only be set with a Web browser
• SNMP Community Name
• Monitor Password
Displaying the Web Control screen
Use the following procedure to display the Web Control screen.
Make sure the computer and projector are connected to the network. Use
Advanced when connecting via a Wireless LAN.
a
If your Web browser is set up to connect via a proxy server, the Web
Control screen cannot be displayed. To display Web Control, you need
to make settings so that a proxy server is not used for a connection.
a
Start a Web browser on the computer.
b
Enter the IP address of the projector in the address input box of
the Web browser, and press the Enter key on the computer's
keyboard.
c
The user ID and password entry screen is displayed.
Enter "EPSONWEB" as the user ID.
The default password is "admin".
a
• Enter the user ID even if the password setting is disabled. The
user ID cannot be changed.
• You can change the password from Basic - Web Control
Password in the Network menu under the Configuration
menu.
s "Basic menu" p.107
Displaying the Web Remote screen
The Web Remote function allows you to perform projector remote control
operations with a Web browser.
a
Display the Web Control screen.
b
Click Web Remote.
c
The Web Remote screen is displayed.
Monitoring and Controlling
85
To Next Page
Loading...
Need help?
General
