E
Install the new Lamp.
Insert the new Lamp along the guide rail in the correct direction so
that it fits in place, push in firmly, and once it is fully inserted
tighten the two screws.
F
Attach the Lamp cover.
Attention
•
Make sure you install the Lamp securely. If the Lamp cover is removed, the
Lamp turns off automatically as a safety precaution. If the Lamp or the Lamp
cover is not installed correctly, the Lamp does not turn on.
•
This product includes a lamp component that contains mercury (Hg). Please
consult your local regulations regarding disposal or recycling. Do not dispose of
it with normal waste.
Replacing Consumables
98
To Next Page
Loading...
Need help?
General
