Installation Settings
Items you are interested in Methods
Tip for adjusting the position of the projected image Set the focus, zoom, and lens shift at least 30 minutes after you start the projection, because images are not
stable right after turning on the projector.
Tilt the projector and install. Set Direction according to the tilt of the projector. (Default: Normal) s p.22
Press the [Menu] button > Extended > Direction
Precautions when the projector is suspended from a ceiling • To fix the projector, use the four screw holes for suspending from a ceiling.
• Never remove the handle. The projector or external equipment may fail if used with the handle removed.
• Remove the feet and attach the covers supplied. Always attach the foot covers when the feet are removed.
• Do not use the feet screw holes to fix the projector or attach other screws. Malfunction may result.
Use when the ambient temperature is high. According to the ambient temperature, set Power Consumption
*
.
Normal 1
Altitude 0 to 1500 m: 0 to +45˚C (No condensation)
Altitude 1500 m to 3048 m: 0 to +40˚C (No condensation)
Projects at normal brightness.
Normal 2
Altitude 0 to 1500 m: 0 to +50˚C (No condensation)
Altitude 1500 m to 3048 m: 0 to +45˚C (No condensation)
Adjusts the brightness automatically according to the surrounding environment.
Press the [Menu] button > Settings > Power Consumption
* EB-Z8455WU/Z8450WU/Z8355W/Z8350W/Z10005/Z10000 only
Before installation (Check items you are interested in)
16
To Next Page
Loading...
Need help?
General
