About Event ID
If a network connection error occurs, an error log (Event ID) is displayed on the following screen.
Standby screen when the Source is set to LAN Press the [Menu] button > Info menu screen
Check the numbers and then apply the following countermeasures.
Event ID Cause Remedy
0432
0435
Failed to startup EasyMP Network Projection. Restart the projector.
0434
0481
0482
0485
Network communication is unstable. Check the network communication status, and reconnect after waiting for a
while.
0433 Cannot play transferred images. Restart EasyMP Network Projection.
0484 Communication was disconnected from the computer.
04FE EasyMP Network Projection ended unexpectedly. Check the status of network communications. Restart the projector.
04FF A system error occurred in the projector. Restart the projector.
0891 Cannot find an access point with the same SSID. Set the computer, the access point, and the projector to the same SSID.
0892 The WPA/WPA2 authentication type does not match. Check that the wireless LAN security settings are correct. s p.52
Network Setup
61
To Next Page
Loading...
Need help?
General
