Transporting Information
Items you are interested in Methods
Precautions when preparing packaging • Turn off the power to the projector and disconnect all cables.
• Attach the cover to the lens.
• Remove the lens unit if an option lens, other than the standard zoom lens, is installed. Attach the standard zoom lens if
the projector has a built-in lens. If the projector does not have a lens, attach the cover that was on the lens mount when
you purchased the projector.
• The vertical and horizontal lens shifts are positioned in the center. s p.22
• Fit the protective lens pad that was used at the time of purchase.
Precautions when packing and transporting Enclose the projector securely in buffer material to protect it from shock, and place it into a strong cardboard container.
Be sure to notify the carrier company that the contents are fragile.
Before installation (Check items you are interested in)
18
To Next Page
Loading...
Need help?
General
