The ranges within which the image can be moved are shown below.
EB-Z8455WU/Z8450WU/Z8355W/Z8350W
EB-Z10005/Z10000/Z8150
A
Center of lens
B
Projected image when lens shift is set in the center
The position of the projected image cannot be moved to both the
horizontal and vertical maximum values.
Adjusting the Zoom
a
Press the [Zoom] button on the Remote Control.
b
Press the [h] button in the [ ][ ] direction in order to adjust.
Adjusting the Focus
a
Press the [Focus] button on the Remote Control.
b
Press the [h] button in the [ ][ ] direction in order to adjust.
Displaying a Test Pattern
A test pattern can be displayed to adjust the projection status without
connecting video equipment.
a
Press the [Menu] button on the remote control or the [Menu]
button on the control panel while projecting.
Installing the Projector
23
To Next Page
Loading...
Need help?
General
