Scale
A section of the image is cropped and displayed. This allows you to create
one large image by combining images projected from multiple projectors.
a
The image quality may become grainy if the image is enlarged using
the scale function.
Follow the steps below to adjust the projected image.
a
Project an image, and then set Scale to On.
Press the [Menu] button > Signal > Scale
b
Set Scale Mode.
You can select Zoom Display or Full Display.
Zoom Display: Adjusts without changing the image size currently
displayed.
When enlarging
When moving
Full Display: Adjusts using the whole area where an image can be
displayed.
When enlarging
Projecting Images
41
To Next Page
Loading...
Need help?
General
