Epson EB-Z8355WUNL Installation Guide

g
Replace the front cover.
Attaching the Interface Cover
By attaching the interface cover, you can hide the connected cables giving a
nice, clean finish to the projector installation.
a
Remove the top cover of the interface when ejecting the
connected cables upward. Remove the bottom cover of the
interface when ejecting the connected cables downward.
b
Install the cover along the guide.
c
Tighten the fixing screw.
Preparation
21

Epson EB-Z8355WUNL Specifications

General

Brand	Epson
Model	EB-Z8355WUNL
Category	Projector
Language	English