Managing Users (Password Protection)
When Password Protection is activated, people who do not know the
password cannot use the projector to project images even if the projector
power is on. Furthermore, the user's logo that is displayed when you turn
on the projector cannot be changed. This acts as an anti-theft function as
the projector cannot be used even if it is stolen. At the time of purchase,
Password Protection is not activated.
Kinds of Password Protection
The following three kinds of Password Protect settings can be made
according to how the projector is being used.
• Power On Protection
When Power On Protection is On, you need to enter a preset password
after the projector is plugged in and turned on (this also applies to Direct
Power On). If the correct password is not entered, projection does not
start.
• User's Logo Protection
Even if someone tries to change the user's logo set by the owner of the
projector, it cannot be changed. When User's Logo Protection is set to
On, the following setting changes for the user's logo are prohibited.
• Capturing a user's logo
• Setting Display Background or Startup Screen from Display
Press the [Menu] button > Extended > Display
• Network Protection
When Network Protection is set to On, changing the settings for
Network is prohibited.
s
"Network Setup" p.48
Setting Password Protection
Use the following procedure to set Password Protect.
a
During projection, hold down the [Freeze] button for about five
seconds.
The Password Protection setting menu is displayed.
Remote control
a
If Password Protection is already activated, you must enter the
password.
If the password is entered correctly, the Password Protection
setting menu is displayed.
s "Entering the Password" p.45
b
Select the type of Password Protect you want to set, and then
press the [Enter] button.
Security Functions
44
To Next Page
Loading...
Need help?
General
