When WPA/WPA2-PSK is selected
Submenu Function
Passphrase
Enter the passphrase. You can enter at least 8 and up to 63 single-
byte alphanumeric characters. When the passphrase is entered
and the [Enter] button is pressed, the value is set and displayed as
an asterisk (*).
When using it with EasyMP Network Projection, you do not
need to input the passphrase in the computer if it is the initial
(default) passphrase.
It is recommended to change the passphrase periodically for the
purpose of security. If the network settings are initialized, it
returns to the initial passphrase.
s "Reset menu" p.60
You can enter up to 32 characters on the Configuration menu.
When entering more than 32 characters, use your Web browser
to enter the text.
In Quick mode, the initial passphrase is set.
When WPA/WPA2-EAP is selected
Submenu Function
EAP Method
Set the protocol for authentication.
PEAP: Authentication protocol widely used in Windows Server.
PEAP-TLS: Authentication protocol used in Windows Server.
Set when using client certificate.
EAP-TLS: Authentication protocol widely used to use a client
certificate.
EAP-Fast, LEAP: Select this when these authentication
protocols are used.
User name
Enter a user name to be used for authentication. You can enter up
to 64 single-byte alphanumeric characters.
If you select PEAP-TLS or EAP-TLS, the user name obtained
automatically from the client certificate is displayed. You can
change the user name if the authentication server requires
another user name.
You can enter up to 32 characters on the Configuration menu.
When entering more than 32 characters, use your Web browser
to enter the text.
If you also need to enter a domain name, add the domain name
before the user name separated by a backslash.
Network Setup
53
To Next Page
Loading...
Need help?
General
