Epson EcoTank L14150 Series

Accessing the Menu
You c a n
nd
the menu on the printer's control panel below.
Fax > Fax Settings > Direct Send.
Sending Faxes in Monochrome at Specied Time of the Day (Send Fax Later)
You can set to send a fax at a
specied
time. Only monochrome faxes can be sent when the time to send is
specied.
1.
Select Fax on the home screen.
2.
Specify the recipient.
“Selecting Recipients” on page 110
3.
Select the Fax Settings tab, and then select Send Fax Later.
4.
Tap the Send Fax Later
eld
to set this to On.
5.
Select the Time
eld,
enter the time you want to send the fax, and then select OK.
6.
Select OK to apply the settings.
You can also make settings such as the resolution and the sending method as necessary.
7.
Send the fax.
Note:
You cannot send another fax until the fax has been sent at the specied time. If you want to send another one, you need
to cancel the scheduled fax by selecting Fax on the home screen, and then deleting it.
Sending Dierent Size Documents Using ADF (ADF Continuous Scan)
Sending faxes by placing originals one by one, or by placing originals by size, you can send them as one document
at their original sizes.
If you place dierent sized originals in the ADF, all of the originals are sent at the largest size among them. To send
originals at their original sizes, do not place originals with mixed sizes.
1.
Place the rst batch of originals at the same size.
2.
Select Fax on the home screen.
3.
Specify the recipient.
“Selecting Recipients” on page 110
4.
Select the Fax Settings tab, and then tap ADF Continuous Scan to set this to On.
You can also make settings such as the resolution and the sending method as necessary.
5.
Tap
x (Send) on the Recipient tab.
Faxing > Sending Faxes Using the Printer > Various Ways of Sending Faxes
112