6.
When scanning the
rst
set of originals is complete and a message is displayed on the control panel asking you
to scan the next set of originals, select Ye s , set the next originals, and then select Start Scanning.
Note:
If you leave the printer untouched for the time set in Settings > General Settings > Fax Settings > Send Settings >
Wait Time for Next Original aer you have been prompted to set the next originals, the printer stops storing and starts
sending the document.
Receiving Faxes on the Printer
If the printer is connected to the phone line and basic settings have been completed using the Fax Setting Wizard,
you can receive faxes.
ere are two ways of receiving faxes.
❏ Receiving an incoming fax
❏ Receiving a fax by making a call (Polling Receive)
Received faxes are printed in the printer's initial settings.
You can save received faxes, check them on the printer screen, and print them as necessary.
To check the status of the fax settings, you can print a Fax Settings List by selecting Fax >
(More) > Fax Report
> Fax Settings List.
Related Information
& “More” on page 118
Receiving Incoming Faxes
ere are two options in Receive Mode.
Related Information
& “Usage of Manual Mode” on page 113
& “Usage of Auto Mode” on page 114
Usage of Manual Mode
is
mode is mainly for making phone calls, but is also for faxing.
Faxing
>
Receiving Faxes on the Printer
>
Receiving Incoming Faxes
113
To Next Page
Loading...
