Epson LQ-570e - Page 114

EPSON LQ-570e/LQ-580 Revision C
Appendix EEPROM Address Map
1
14
3AH,3BH (reserved) 0000H 0000H
3CH Font selection 0:Roman 4:Prestige
1:Draft 5:Script
2:Sans Serif 6:Others (Default Setting Font)
3:Courier
00H(Roman) 00H(Roman)
3DH Pitch selection 0:10cpi 3:17cpi
1:12cpi 4:20cpi
2:15cpi 5:Proportional
00H(10cpi) 00H(10cpi)
3EH,3FH (reserved) 0000H 0000H
40H Print direction setting 0:Bi-d. 1:Uni-d. 2:Auto 00H(Bi-d.) 00H(Bi-d.)
41H Other font selection 00H:Roman T 03H:Orator
01H:Sans Serif H 04H:Orator-S
02H:OCR-B 05H:Script C
00H 00H
42H,43H Tear-off adjustment value -128 to +127 (-25.4mm(-1inch) to 25.4mm(1inch), by 0.0706mm(1/360 inch)) 0000H 0000H
44H Auto line feed
Auto tear off
Skip over perforation
High speed draft
----
----
----
----
b0:Auto line feed 0:Off 1:On
b1:Auto tear off 0:Off 1:On
b2:Skip over perforation 0:Off 1:On
b3:High speed draft 0:On 1:Off
b4: (reserved)
b5:(reserved)
b6:(reserved)
b7:(reserved)
00H 00H
45H Software
0 slash
Buzzer
Roll paper
Auto CR
A.G.M.
----
----
b0:Software 0:Off 1:On
b1:0 slash 0:Off 1:On
b2:Buzzer 0:Off 1:On
b3:Roll paper 0:Off 1:On
b4:Auto CR
b5:A.G.M.
b6:(reserved)
b7:(reserved)
00H 00H
46H-49H (reserved) 00H 00H
Table 7-15. EEPROM Address Map
Address Data Data Format Q-pit data Factory Setting