What to do if Epson Printer makes noise but nothing prints?
If your Epson printer is making noise but not printing, the paper thickness lever might be set incorrectly; adjust it to match your paper's thickness. Also, the ribbon could have too much slack, be loose, or the cartridge might not be installed correctly; remove any slack by turning the ribbon-tightening knob or reinstall the ribbon cartridge.
How to fix if Epson LQ-570e Printer printing starts too high or low on the page?
If printing on your Epson printer starts too high or low on the page, check the paper size setting in your application or printer driver to ensure it matches the paper you are using. Also, verify the printer’s page length settings for the tractor using the printer’s default-setting mode or the EPSON Remote! utility. Ensure that the top margin or top-of-form position setting in your application software is correct. Verify that the correct printer is selected in your software before printing. If you moved the paper using the knob while the printer was on, adjust the top-of-form position using the micro adjust feature.
What to do if Epson LQ-570e prints strange symbols?
If your Epson printer is printing strange symbols, incorrect fonts, or other inappropriate characters, ensure your printer and computer are communicating correctly by using the correct interface cable and verifying the communications protocol. Also, check that the correct character table is selected in your software. Make sure the correct printer is selected from the Windows desktop or in your application before printing. Finally, ensure that your application software is configured correctly for your printer.
Why my Epson LQ-570e does not load continuous paper properly?
If your Epson printer isn't loading continuous paper, the paper release lever might not be set correctly; set it to the tractor position for the paper source you want to use. If single-sheet paper is in the paper path, set the paper release lever to the single-sheet position and press the Load/Eject button to eject the sheet, then return the lever to the tractor position. Also, ensure that the paper thickness lever is correctly set to match the thickness of your paper.
What to do if Epson Printer prints on the perforation?
If your Epson printer prints on or too far from the perforation, adjust the tear-off position using the micro adjust feature. If you moved the paper using the knob while the printer was on, also adjust the tear-off position using the micro adjust feature. Ensure that the correct printer is selected in your software. Additionally, check the paper size setting in your application or printer driver and the printer’s page length settings for the tractor.
General| Type | Dot Matrix Printer |
|---|---|
| Print Method | Impact dot matrix |
| Print Resolution | 360 x 360 dpi |
| Number of Pins | 24 pins |
| Paper Size | A4, Letter, Legal |
| Paper Width | 4 - 10 inches |
| Interfaces | Parallel |
| Noise Level | 55 dB |
| Emulation | ESC/P 2 |
To Next Page
