Epson LX-300+II RTP

EPSON LX-300+II/300+II RTP/1170II Revision D
PRODUCT DESCRIPTION SPECIFICATIONS 15
1.2.9 Recommended Printable Area
NOTE: For best results, print within the recommended printable area. The
printer may not print outside this area.
 Cut sheets
Figure 1-2. Recommended Printable Area for Cut Sheet
Recommended Printable Area
Table 1-10. Recommended Printable Area for Cut Sheet
Single Sheet Multi Part
PW (Width) Refer to 1.7 “Paper Specifications” Refer to 1.7 “Paper Specifications”
PL (Length) Refer to 1.7 “Paper Specifications” Refer to 1.7 “Paper Specifications”
LM (Left Margin) LX-300+II:
3 mm or more (PW<=229 mm)
24mm or more(PW=257 mm)
LX-1170II:
3 mm or more (PW<=364 mm)
29mm or more(PW=420 mm)
LX-300+II:
3 mm or more (PW<=229 mm)
24mm or more(PW=257 mm)
LX-1170II:
3 mm or more (PW<=364 mm)
29mm or more(PW=420 mm)
RM (Right Margin) LX-300+II:
3 mm or more (PW<=229 mm)
24mm or more(PW=257 mm)
LX-1170II:
3 mm or more (PW<=364 mm)
29mm or more(PW=420 mm)
LX-300+II:
3 mm or more (PW<=229 mm)
24mm or more(PW=257 mm)
LX-1170II:
3 mm or more (PW<=364 mm)
29mm or more(PW=420 mm)
TM (Top Margin) 4.2 mm or more 4.2 mm or more
BM (Bottom Margin) 4.2 mm or more 4.2 mm or more
NOTE: The maximum horizontal recommended printable area is 203.2 mm for
LX-300+II/ 345.44 for LX-1170II.