EPSON LX-300+II/300+II RTP/1170II Revision D
PRODUCT DESCRIPTION Initialization 35
1.6 Initialization
Power-on initialization
The initialization of this level is activated by power-on or cold-reset command
(remote RS command).
This initialization is;
to initialize the printer mechanism.
to execute Operator initialization.
Operator initialization
The initialization of this level is activated by -INIT signal (negative pulse).
This initialization is;
to clear all the buffers of data.
to cancel the download character definition.
to make the printer stand-by state, if no errors occur.
to execute Software initialization.
Software initialization
The initialization of this level is activated by the control code ESC@.
This initialization is;
to clear the unprinted data.
to make the printer’s setting defaults.
To Next Page
