Epson LX-300+II RTP - 1.5 Printer Control Codes

EPSON LX-300+II/300+II RTP/1170II Revision D
PRODUCT DESCRIPTION Control codes 29
1.5 Control codes
1.5.1 ESC/P2
* LX-300+II only
Table 1-28. ESC/P2
Classification Operation Command
General Operation Initialize Printer ESC@
Unidirectional Printing ESC U
CSF Mode Control ESC EM
Paper feeding Form Feed FF
Line Feed LF
Line Spacing
ESC 0, ESC 1, ESC 2, ESC3,
ESC A
Carriage Return CR
Page format Page Length ESC C, ESC C0, ESC (C
Left / Right Margin ESC Q, ESC1
Top / Bottom Margin ESC N, ESC O, ESC (c
Define Unit ESC (U
Print position motion Horizontal Print Position ESC$, ESC ¥
Tab Horizontally ESC D, HT
Tab Vertically ESC B, VT
Advance paper ESC J
Font selection Typeface ESC k, ESC x, ESC y
Pitch ESC P, ESC M, ESC g, ESC p
Italic Font ESC 4, ESC 5
Bold Font ESC E, ESC F
Master Select ESC!
Font enhancement Double-Width ESC W, DC4, SO
Condensed DC2, SI
Double-height ESC w
Double-Strike ESC G, ESC H
Super-/ Subscript ESC T, ESC S
Underline ESC-
Spacing Intercharacter Space ESC Space
Character handling Character Table ESC t, ESC (t
International Character ESC R
User-Defined Characters ESC%, ESC &, ESC:
Control code selection ESC1
Upper Control Codes ESC6, ESC7
Bit image
8 pin Bit Image
ESC K, ESC L, ESC Y, ESC Z,
ESC*
9 pin Bit Image ESC ^
Printing color* Select color ESC r
Bar code Bar code ESC (B
Production EEPOM write, etc. ESC|
Table 1-28. ESC/P2 (continued)
Classification Operation Command