Epson LX-300+II RTP User Manual

EPSON LX-300+II/300+II RTP/1170II Revision D
PRODUCT DESCRIPTION Operation 25
1.4.1.2 Indicators
 Indication in normal mode
*1 Pause (Orange)
-It is on when the printer is paused, and it is off when the printer is not paused.
-It blinks when Micro Adjust is enabled or the printer is in the head hot status.
*2 Paper Out (Red)
-It is on when the printer is in the Paper out status, and it is off when the printer is out
of this status.
*3 Font (Green)
-2 LEDs display the status of Font selection when continuous paper is out of the Tear-
off position .
-Both LEDs blink when continuous paper is in the Tear-off position.
  : Draft
  : Draft Condensed
  : Roman
 : Roman Condensed
 : Sans serif
  : Sans serif Condensed
 : Tear Off
(
 : LED On,  : LED Off,  : LED Blinks)
1.4.1.3 Buzzer
 Paper out error: Beeper sounds (...)*
 Release lever operation error: Beeper sounds (...)*
 Fatal error: Beeper sounds (-----)*
*The description (.) and (-) in the above shows how the beeper sounds.
(.): Beeper sounds approx. 100 ms and interval is approx. 100 ms.
(-): Beeper sounds approx. 500 ms and interval is approx. 100 ms.
Table 1-25. Indication in normal mode
LED
Pause
*1
Paper Out
*2
Font
Printer Status
Pause On --- ---
Paper out error On On ---
Release lever error On --- ---
Paper eject warning On Blink ---
Head hot warning Blink --- ---
Micro Adjust Blink --- ---
Tear off --- --- *3
Font selection --- --- *3
Fatal error Blink Blink Blink

Epson LX-300+II RTP Specifications

General

Brand	Epson
Model	LX-300+II RTP
Category	Printer
Language	English