Epson LX-300+II RTP

EPSON LX-300+II/300+II RTP/1170II Revision D
PRODUCT DESCRIPTION Paper Specifications 38

Labels
Note: The value in parentheses represents the size available with LX-1170II.
Note: Printing on labels is available only under normal temperature and humidity
conditions.
Note: The base sheet of labels must be continuous paper.
Note: Continuous paper with labels should be inserted from the bottom entrance.
Figure 1-9. Recommended Printable Area for Label

Roll paper
Table 1-44. Continuous Paper with Labels
Rear Entry Bottom Entry
Min. Max. Min. Max.
Label size --- See the figure below.
Base sheet width
inch
--- ---
4 10 (16)
mm 101.6 254 (406.4)
Base sheet length
(one page)
inch
--- ---
4 22
mm 101.6 558.8
Base sheet
thickness
inch
--- ---
0.0028 0.0035
mm 0.07 0.09
Total thickness
inch
--- ---
0.0063 0.0075
mm 0.16 0.19
Label weight
g/m
2
--- ---
64
lb. 17
Quality ---
AVERY CONTINUOUS FORM
LABELS, AVERY MINI-LINE
LABELS or the same quality labels
63.5 mm (2.5 inches) min.
23.8 mm
(15/16 inch)
min.
R_2.5 mm (0.1 inch) min.
Label
Table 1-45. Roll Paper
Minimum Maximum
Width
inch 8.5
mm 216
Length
inch - - -
mm - - -
Thickness
inch 0.0028 0.0035
mm 0.07 0.09
Weight
g/m
2
52 82
lb. 14 22
Quality Plain paper, Not curled, not folded, not crumpled